 | 32 High current outputs |
| Each output sources 12VDC |
| Up to 6 operating positions |
| Two packaging options |
| Tri-color LED status indicator |
|
The Shack-LAN Relay Drivers provide a solution to
interface your existing remote antenna switches, such as SixPaks,
StackMaster, StackMatch, etc. to our Shack-LAN Ethernet based controls. The
Relay Drivers contain 32 high-current FET output drivers and are ideal for
controlling high-current relays and can be configured for up to 8 antennas
per band and support up to 6 operating positions. For multi-multi operations
with each station dedicated to one band, the Relay Drivers can be shared
amongst the operating positions to select antennas on each band and for
controlling antenna stacks.
Each radio/band/antenna combination
can be configured to activate any combination of the 32 outputs, making it
ideal for switching stacks or 4-square arrays in addition to more
traditional types antenna switching.
As with all Shack-LAN products,
configuring the Relay Interface unit can be done from within our miLog
software or a stand-alone GUI based program. Configuration data is stored
within the units and may also be saved to disk files for fast recall when
reconfiguring your station for multi-multi, multi-two, SO2R or Single Op. ,
all configuration data is stored in the Relay Interface itself.
The Relay Driver units
are housed in a 1.75" high rack
chassis with 32 LEDs on the front panel to indicate the status of each
output.
$499 US - Rack version
Buy Hamation ShackLan |
