Home
home products support company info   view cart
 

 

Material on this website:  copyright 1997-2012. It may be printed for your personal use but may not be used for commercial purposes, copied, or altered and posted on other websites
Array Solutions

Phone
(214) 954-7140
Fax
(214) 954-7142

Email Us

 

RigExpert AA-30 / AA-54 Antenna Analyzers(New!)

RigExpert AA-30 and AA-54 are powerful antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines.

Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers). 

Easy-to use measurement modes, as well as additional features such as connection to a personal computer (to plot Smith diagrams, etc.), make RigExpert AA-30 and AA-54 attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna.

The following tasks are easily accomplished by using RigExpert AA-30 and AA-54:

- Rapid check-out of antenna; 

- Tuning an antenna to resonance; 

- Antenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.);

- Making coaxial lines or measuring their parameters; 

- Cable testing and fault location;

- Measuring capacitance or inductance of reactive loads 

Downloadthe RigExpert AA-30/AA-54 User's manual.
Download the RigExpert AA-30/AA-54 Software manual.

Download the operating software install disk (zip file)

  
 Buy it in our Shopping Cart                                                                                   
AA54 Firmware Downloads:

AA-54 Rev A ver 103a  (S/N 1..200)            http://www.rigexpert.com/index?get=firmware/aa54_103.zip

AA-54 Rev.B ver 103b (S/N 201..850)    http://www.rigexpert.com/index?get=firmware/aa54revb_103.zip

AA-54 Rev C ver. 105 (S/N 851 + only!)
http://www.rigexpert.com/index?get=firmware/aa54revc_105.zip 

Do not use the Rev C.update with rev.A and rev.B analyzers (S/N 850 and lower). If you do, you will cause your AA54 to stop working.

 
 

 

AA-230 and AA230 PRO

RigExpert AA-230 PRO

Antenna Analyzer

 

RigExpert AA-230 and AA-230PRO are powerful, laboratory grade antenna analyzers designed for testing, checking, tuning or repairing antennas and antenna feedlines in 0.3 to 230 MHz range.

Mainly, these are SWR (Standing Wave Ratio) and impedance measurement instruments (vector impedance analyzers).

Easy-to use measurement modes, as well as additional features such as memory storage and connection to a personal computer, make RigExpert analyzers attractive for professionals and hobbyists. It is quite important that graphical display of various parameters over a wide frequency range is a key feature of these analyzers which significantly reduces the time required to adjust an antenna.

The new MultiSWR™ and SWR2Air™ modes are unique for these antenna analyzers.

The built-in TDR (Time Domain Reflectometer) mode which is available in RigExpert AA-230PRO is ideal for locating cable faults.

The following tasks are easily accomplished by using RigExpert AA-230 and AA-230PRO:

 
bulletRapid check-out of an antenna
bulletTuning an antenna to resonance
bulletAntenna SWR and impedance measurement and comparison before and after specific event (rain, hurricane, etc.)
bulletMaking coaxial lines or measuring their parameters
bulletCable testing and fault location
bulletMeasuring capacitance or inductance of reactive loads


Download the RigExpert AA-230/AA-230PRO User's manual.
Download the RigExpert AA-230/AA-230PRO Software manual.
 
 


 


 Buy it in our Shopping Cart

Comparison table

of RigExpert antenna analyzers



 
Function
 		 AA-30 AA-54 AA-230 AA-230PRO AA-520
 
Frequency range
 		 .1 to 30 MHz .1 to 54 MHz 0.3-230 MHz 0.3-230 MHz 1-520 MHz
 
Frequency entry step size
 		 1kHz 1kHz 1 kHz 1 kHz 1 kHz
 
Min. sweep range
 		 10kHz 10kHz 10 kHz 10 kHz 100 kHz
 
SWR2AIR™ mode
 		 - - + +
 		 -
 
Reactance sign measurement
 		 + + + +
 		 -
 
Connector type
 		 UHF-SO239 UHF SO239 UHF SO239 UHF SO239 Type N
 
Output power
 		 +13 dBm +13 dBm +10 dBm +10 dBm +5 dBm
 
Output amplifier
 		 CMOS Logic Chip CMOS Logic Chip Transistor stage with additional protection Transistor stage with additional protection
 		 Transistor stage with additional protection
Reference impedance for SWR measurement
 		 50, 75 ohm 50, 75 ohm 25, 50, 75, 100 Ohm 25, 50, 75, 100 Ohm 50 Ohm
 
Analog-to-digital converter
 		 10 bit 10 bit 12-bit 16-bit
 		 16-bit
 
Battery voltage sensor
 		 + + + +
 		 +
 
Battery Type 2x AA Alkaline or Rechargable 2x AA Alkaline or Rechargable Proprietary  4.8v NimH pak Proprietary  4.8v NimH pak Proprietary  4.8v NimH pak
Operation with external power supply (without battery)
 		 - - + +
 		 +
 
LCD backlit
 		 Green Green White, ultra-bright LEDs White, ultra-bright LEDs
 		 White, ultra-bright LEDs
Time Domain Reflectometer mode
 		 - - Only with AntScope software on the PC Built-in
 		 -