| |||||||||||||||||||||||
|
|
Array Solutions Antenna masts solve this problem for ham and commercial customers and now we offer them up to 42 foot long with our new PE certified mast coupler!These are Chrome Moly and 1026 DOM steel tubing masts rated and certified to withstand serious antenna loads by ASTM Standards. These are the only steel tubing masts that Professional Engineers will rate for top of tower antenna mast duty in all parts of the country. These masts are hot dipped galvanized inside and out with special care to give them gleaming results to last a lifetime. The new PE Certified Mast coupler allows us to extend Masts up to 42 feet. See the details Here> Mast Coupler Others may say they sell you "their" masts, but do they actually handle the masts themselves? Ask them if they just don't drop ship them from a galvanizer in another state sight unseen. Do they Protect the finish? We put them in heavy duty cardboard tubes to assure you won't be dissatisfied.
|

| We actually inspect each mast to be certain the galvanizing was done correctly
before we accept it from the galvanizer. The ones that don't meet the quality test get
re-galvanized! There have been too many stories about masts that were poorly galvanized,
and after you pay a $150+ for shipping you get stuck with it. Don't let
this happen to you. We package the tubes in their own special tubes, so no damage will occur to the
protective finish. These masts are shipped to you via truck freight, It's best if A) you can have it delivered to a commercial address or B) pick it up at the freight dock or C) be present when the truck comes to make delivery. The freight company
charges a residential delivery fee of $61 We arrange for
you to track the shipment as it progresses with a PRO number via the internet. Since we are now buying in volume you get a better price! Please consider these products in our antenna mast lineup. WE have some 22 and 23 foot Masts now in Stock July 2008 Call for them!
|
| Mast Coupler |
2 foot long |
Includes hardware |
$ 180.00 |
| 4130 Chrome Moly
~100 k psi |
Sizes |
$/ft |
$ Price |
| 2" OD X 1/4"wall | ~11' | 25.00 | 275.00 |
| 2" OD X 1/4" wall | ~22 | 24.00 | 528.00 |
Also if you want a short mast look at our flea market page
| 1026 DOM Tube
87 k psi |
Sizes | $/ft | $ Price |
| 2" OD X 1/4"wall | 11' | 19.50 | 214.00 / 11 FT |
| 2" OD X 1/4"wall | 22' | 18.50 | 407.00 / 22 FT |
| 2 7/8" OD X .25 wall | 11' | 26.50 | 291.50/11 FT |
| 2 7/8" OD X .25 wall | 22' | 25.50 | 561.00/22 FT |
Weight for 2 inch masts are approximately 5 lbs / foot
|
NOTE about how these tubes are sold. Lengths subject to availability, we get long tubes between 20 and 22 feet. We may be able to select you a preferred size. But we will not sell an intermediate cut size. We will sell for instance a 20 foot tube cut to 16 feet but you will be charged for a 20ft tube and sent both pieces. How strong are these masts before they deform permanently? 2 7/8" OD X .25" wall 1026 DOM (87k psi) mast has a Yield Moment of 108,448 in-lbs 2 " OD X .25 wall 4130 chrome Moly ( 100k psi) mast has a Yield Moment of 53,689 in-lbs 2" OD X .25" wall 1026 DOM (87k psi) mast has a Yield Moment of 46,710 in-lbs Each Mast is tested, for chemical, metallurgical, and mechanical properties. A certificate verifies the strength of your mast. A typical certificate is scanned and shown below: |
.
Another shipment ready to go!

Buy now Pricelist and shopping cart
Application notes - Learn why it is important to have a good quality mast, and how to select one