Home
home products support company info   view cart

 

Material on this website:  copyright 1997-2010. It may be printed for your personal use but may not be used for commercial purposes, copied, or altered and posted on other websites

Array Solutions

Phone
(214) 954-7140
Fax
(214) 954-7142

Email Us

AS-611HP High Performance CB OWA YAGI

Why should hams have all the fun!

The Array Solutions AS-611/HP 11 meter Antenna is a 6-element monoband Yagi on a 40 foot boom. The AS-611/HP is rated for 120 mph and >10 KW. Also the AS-611/HP is designed with large diameter elements and solid tips for corona suppression.

The AS-611/HP is a slightly different design than most Yagis, as the feed point is a direct feed design for 50 ohms without the use of any matching devices such as gamma, or hairpins which can be sources of failures. There is a reflector, a driver and four (4) director elements. The AS-611 is based on the OWA techniques to achieve several goals. The advantages of the design are the simple feed system (no match) and extremely wide band VSWR operation where the gain and pattern vary a minimal amount. Using large elements, corona control and special insulators this antenna is capable of handling huge power levels.

AS-611/HP Specifications

Electrical

 

AS-611/HP

11 Meters

Freq. Coverage

27.100 MHz center

VSWR

<1.2:1 total band

Front-to-Back Ratio

>20 dB

Front-to-Side Ratio

>30 dB

 

Gain (dBi) @ 55’

17.1 dBi

Net Gain (dBd)

7.8 free space

Power rating

>10 KW

Mechanical

 

AS-611/HP

Boom Length

40 ft.

Number of Elements

6

Longest Element

~18 ft

Turn Radius

25.5 ft.

Assembled Weight

44 lbs.

Wind Load (effective)

5.5 sqft. Area

Wind Survival (Std)

120 MPH

The VSWR curve for the AS-611/HP allows full coverage. The VSWR does not exceed 1.2:1 anywhere in the band. Gain, and Front to Back ratio also remain constant over the entire frequency range of the antenna on the 11m band due to the unique design.

 

Price $1,648 and shipping is approx $100 via UPS to the US mainland.  Call to purchase 214 954 7140

A 1:1 balun is required and we price them according to your power level.  Our W1JR-50-3 and the balun mounting plate (BMP) are a good choice for most applications.