Please specify your rotator make and model if you want to and we can set the pigtail connector wiring, internal jumpers and partially configure the controller for you.
The RA-S1 is a digital controller for azimuthal rotators. Its main features are:
- Voltage output regulated with PWM (Pulse Width Modulation)
- Soft-start and Soft-stop With the PWM speed control, the controller softly ramps up and ramps down the rotator’s speed on every operation mode.
- On-hand speed controls The potentiometer’s SPEED to make it easy to adjust the rotation speed.
- Point and Shoot Choose an azimuth with the POS potentiometer, press GO and let the controller softly guide the rotator to the chosen bearing.
- Offset definition Quickly corrects the azimuth your antenna is pointing at, without the need of a new calibration.
- Software defined limits With them your stacked antennas won’t hit the tower. It is very intuitive to configure.
- Serial RS-232 communications with DB-9 or USB The RA-S1 controller uses the Yaesu protocol GS232A, making it easy to use with every existing program.
- Firmware Upgradeable It is possible to upgrade the firmware of the controller easily with the USB port. Your controller will never be out of date.
- Full compatibility with most rotators The RA-S1 was developed to work with most of the available rotators in the market, being able to control AC rotators (24 or 36 V AC) and DC (12, 24 or 36 V DC)*, that have positioning feedback by pulses or internal potentiometer. The rotators commonly used (Yaesu G-800, G-1000, G-2800, HyGain HAM-IV, T-2, Pro.Sis.Tel PST-71D, PST-61D, PST-2051, PST-641, M2 Orion 2800) can be used with these systems.
- Unit dimensions are 8" x 8" x 4" H
AS-RA-S1 User's manual, click here to download
Rear panel view of the AS-RA-S1 rotator controller. A cable pigtail with the 12-pin male connector is provided with the unit.
Watch a video of the controller working with a PST61 Prosistel Rotator, click here
Watch a video of an example of configuration with a Yaesu G-450 rotator, click here
AS-RA-S1 - Digital Rotator Controller
- Brand: Array Solutions
- Product Code: AS-RA-S1
- Availability: In Stock
-
$475.00
Related Products
AS-8SP - Eight terminal 65 V Surge suppressor for control lines and rotators
AS-8SP Eight control wires surge arrestor. Needs ground connection. Eight and Sixte..
$94.00
AS-12SP - Twelve terminal 65V Surge suppressor for control lines and rotators
AS-12SP: Surge arrestor for 12 control wires. Needs grounding. Eight and Sixteen terminal 65V Sur..
$105.00
AS-16SP - Sixteen terminal 65V Surge suppressor for control lines and rotators
AS-16SP: Surge arrestor for 16 control wires. Needs grounding. Eight and Sixteen termina..
$135.00
PST641 - Rotator without controller (compare to Ham IV, G800 good for small, lightweght tribanders)
Pro.Sis.Tel PST 641D rotator without controller. Wind area: 1.2 m2 (12.9 sqft). Vertical load: 350..
$575.00
PST2051 - Rotator without controller (compare to T2X, G1000 good for tribander and 2 el 40 m Yagi)
Pro.Sis.Tel PST 2051D rotator without controller. Wind area: 2.5 m2 (26.9 sqft). Vertical load: 65..
$749.00
PST61 - Rotator without controller (Compare to Orion 2800, HDR 300, G2800, good for Large Multi-band Yagis - OptiBeams)
Pro.Sis.Tel PST 61D rotator without controller. Wind area: 3.9 m2 (42 sqft). Vertical load: 850 kg..
$1,150.00
PST61D - Rotator with controller (Compare to Orion 2800, HDR 300, G2800, good for Large Multi-band Yagis - OptiBeams)
Pro.Sis.Tel PST 61D rotator with controller. Wind area: 3.9 m2 (42 sqft). Vertical load: 850..
$1,595.00
PST71 - Rotator without controller (For Stepp IR MonstIR, long Boom 20m, 40m, 80m yagis, multiple Yagis on one mast)
Pro.Sis.Tel PST 71D rotator without controller. Wind area: 8.8 m2 (94.7 sqft). Vertical load: 1000..
$2,495.00
PST110D - Rotator with controller (Compare to Prop-pitch, uses own special controller extreme large arrays)
Pro.Sis.Tel PST 110 rotator with controller. Wind area: 10 m2 (107.6 sqft). Vertical load: 1200 kg..
$3,295.00
PST Rotators Potentiometer 10 turn, 10 kΩ
Potentiometer, 10 turn, 10 kΩ for Pro.Sis.Tel rotators. Note: You may need to drill a 1/4" cleara..
$35.00
PST Rotators Potentiometer 3 turn, 500 Ω
Potentiometer, 3 turn, 500 Ω for Pro.Sis.Tel rotators Note: You may need to drill a 1/4" clearance ..
$35.00
PST Rotators Potentiometer 10 turn, 10 kΩ with installation
ROTATOR MUST BE AT ARRAY SOLUTIONS IF YOU PURCHASE THIS ITEMPotentiometer, 10 turn, 10 kΩ and instal..
$80.00
PST Rotators Potentiometer 3 turn, 500 Ω with installation
ROTATOR MUST BE AT ARRAY SOLUTIONS IF YOU PURCHASE THIS ITEMPotentiometer, 3 turn, 500 Ω and install..
$80.00
Tags: ra-s1, rt-21d, rt21d, as-ra-s1, rt-21, orion, rotators, PST, Prosistel, rt21, controler, Pro.Sis.Tel, controller, orion2800px, rotator controller, rotator, orion2800, rotors, rotores, AS-RA-S1, controller, CONTROLLER