The system continues expanding our 4-wire control infrastructure and will integrate with existing 4-wire systems that include our BandMaster III band decoders and the FilterMax IV (W3NQN) band pass filter systems.

There are two new options for controllers:

1) Manual and / or software control

2) As above plus a built-in band decoder

3) Click here to go to www.hamation.com and click on "Control Center" on the side bar

The band decoder that is part of the Integrated Controller supports Icom, Kenwood, Yaesu, and Elecraft K3 radios. Interface cables for your radios are available for $40 each or less.

A complete system will consist of one EightPak relay box and the DRC-8 controller or any assortment of up to three more controllers. The manual controller will integrate with BandMaster decoders you may already have in your system.

Click here to download the EightPak manual

Specifications:

• Eight antennas can be shared by two radios
• High isolation between all ports means safe reliable operation without risk to radio front ends.
• Single 4-wire control cable, makes wiring easy and economical.
• Indoor Version: The box is 13" x 6" x 3.25" and the flanges are 1/2".
• Can be used with manual controllers or via RS-232 or USB interface.
• Can be controlled via 4 wire cable from our BandMaster automatic radio band decoder and interfaces with the new FilterMax bandpass filter (One 8-pak, two BandMasters and two FilterMax or BandPasser filter systems are required for SO2R)
• Mechanical and electronic lockouts so two radios will never be connected together.
• 3 kW at 3:1 VSWR.
• Low VSWR to 55 MHz.
• All unused inputs are grounded.
• Backed by the Array Solutions Lifetime Warranty.

Optional Controllers and Automation Devices that other users have ordered along with the EightPak:

Integrated Controller: Includes band decoder to read the band information from the transceiver and will select the antenna programmed for the selected band. One controller needed per each radio connected to the the EightPak.

PSC8: One controller needed for each radio connected to your EgihtPak system.

Bandpasser II: Six band band pass filter system. Will select the filter automatically or manually.

One unit needed per each radio connected to your EightPak system.

Filter Max IV: Six band band pass filter system. One needed per each transceiver connected to the EightPak.