Super Heavy Duty antenna Rotator, handle up 10m2 (80sq. Ft.) of antenna wind load.
Worm-wheel technology irreversible under mast torque.
Large starting and braking torque, no sweep no backslash.
Far away from the nearest competitors.
Soft start e soft stop with programmable ramp speed.
A Controller fully controllable via USB Com port
Two year warranty
- Max wind load area 10 m²
- Braking torque 16.500Kgcm = 1.617Nm
- Rotating torque 7.959Kgcm = 780Nm
- Max vertical load 1.200Kg
- Motor voltage 42 VDC
- Rotating range 360°
- Rotation speed ~120 seconds for 360°
- Reading accuracy 1° no backlash
- Antenna mast OD 40-80mm (special version on request)
- Operational temperature range (°C): rotor unit -40° ÷ +60°
control box -20° ÷ +60°
- Storage temperature (°C): rotor unit -40° ÷ +70°
control box -25° ÷ +60°
- Weight (rotator only) ~ 40kg
PST110D-PRO-HD - Rotator with controller with increased Rotating Torque
- Brand: Pro.Sis.Tel
- Product Code: PST110D-PRO-HD
- Availability: In Stock
AS-8SP Eight control wires surge arrestor. Needs ground connection.
Eight and Sixte..
AS-12SP: Surge arrestor for 12 control wires. Needs grounding.
Eight and Sixteen terminal 65V Sur..
AS-16SP: Surge arrestor for 16 control wires. Needs grounding.
Eight and Sixteen termina..
Pro.Sis.Tel PST 2051D rotator without controller. Wind area: 2.5 m2 (26.9 sqft). Vertical load: 65..
Pro.Sis.Tel PST 2051D rotator with controller. Wind area: 2.5 m2 (26.9 sqft). Vertical load: 650 k..
Pro.Sis.Tel PST 61D rotator without controller. Wind area: 3.9 m2 (42 sqft). Vertical load: 850 kg..
Pro.Sis.Tel PST 61D rotator with controller. Wind area: 3.9 m2 (42 sqft). Vertical load: 850..
Pro.Sis.Tel PST 71D rotator without controller. Wind area: 8.8 m2 (94.7 sqft). Vertical load: 10..
Pro.Sis.Tel PST 71D rotator with controller. Wind area: 8.8 m2 (94.7 sqft). Vertical load: 1000 ..
Super Heavy Duty antenna Rotator, handle up 10m2 (80sq. Ft.) of antenna win load.Worm-wheel techno..
Ring Rotator to install around the tower. Brackets to handle 12" (30 cm) face to 20" (52 cm) face to..
These potentiometers are new, but have been previously been installed in PST rotators. This s..
Potentiometer, 3 turn, 500 Ω for Pro.Sis.Tel rotators
Note: You may need to drill a 1/4" clearance ..
ROTATOR MUST BE AT ARRAY SOLUTIONS IF YOU PURCHASE THIS ITEMPotentiometer, 3 turn, 500 Ω and install..
PCB for PST "D" controller..
DC 7 pin rotator round connector. Uses pins 1 to 5 for PST rotators.
eplacement motor for all 12VDC ProSisTel rotators.Includes motor, gearbox, and motor key.All OEM frp..
Replacement motor for PST71Dl 24VDC ProSisTel rotator.Includes motor, gearbox, and motor key.All OEM..
We have most all of the replaceable parts for ProSisTel rotators and controllers.Some are listed o..
Have you upgraded your computer, but not your controller?This complete kit has everything to conve..
Five pin square ProSisTel connector that is used on the control line for a PST "D" controller...