Pro.Sis.Tel PST 641D rotator with controller. Wind area: 1.2 m2 (12.9 sqft). Vertical load: 850 kg (1873 lbs).
Medium duty antenna
Rotator, handle up 1.2 m2 (13 sq. Ft.) of antenna windload.
Worm-wheel technology
irreversible under mast torque.
Large starting and
braking torque
Soft start e soft
stop with programmable ramp speed.
Two years warranty
Specifications:
- Max
wind load area 1.2 m²
-
Braking
torque 1.959Kgcm = 192Nm
-
Rotating
torque 1.000Kgcm = 98Nm
- Max
vertical
load 350Kg
-
Motor
voltage 12 VDC
-
Rotating
range 500° (70+360+70)
-
Rotation
speed ~90 secondi per 360°
-
Reading
accuracy ~1% no backlash
- Antenna
mast OD 48-50mm
-
Operational temperature range (°C): rotor
unit -40° ÷ +60°
control box -20° ÷
+60°
-
Storage temperature
(°C): rotor
unit -40° ÷ +70°
control box
-25° ÷ +60°
-
Control box power
input 230VAC (115VAC) , 50-60Hz, 50VA
-
Direction
reading Digital (potentiometer)
-
Limits Electronic, adjustable by software
-
Rotator
cable 5 wires (2 x 1mm² + 3 x 0,5mm²)
- Weight (rotator only) ~ 5 kg
Some details:
- High strenght cast
alluminium gear box
- Rugged and proven
design.
- Nickel
chromium-molybdenum steel and bronze alloy gears
running on
balls bearings
- No maitenance, life
lubrificated.
- Strength steel
galvanized mast clamp.
- Stainless steel bolts.
- IP55
To see more of Pro.Sis.Tel rotators and manuals, click here
To download a zip file with the V3.23 software and manuals click here
PST641D - Rotator with controller (compare to Ham IV, G800 good for small, lightweght tribanders)
- Brand: Pro.Sis.Tel
- Product Code: PST641D
- Availability: In Stock
-
$965.00
Related Products
AS-8SP - Eight terminal 65 V Surge suppressor for control lines and rotators
AS-8SP Eight control wires surge arrestor. Needs ground connection. Eight and..
$95.00
AS-12SP - Twelve terminal 65V Surge suppressor for control lines and rotators
AS-12SP: Surge arrestor for 12 control wires. Needs grounding. Eight and Sixteen terminal 65V..
$119.00
AS-16SP - Sixteen terminal 65V Surge suppressor for control lines and rotators
AS-16SP: Surge arrestor for 16 control wires. Needs grounding. Eight and Sixteen ..
$135.00
Thrust Bearings model TB-2 for 2 inch OD Galvanized masts
Thrust bearing for masts up to 2" OD Instructions Bearing dimensions ..
$195.00
Thrust Bearings model TB-3 for 2-7/8 inch OD Galvanized masts
Thrust bearing for masts up to 2-7/8" OD Instructions Weight: 18.8 lb (8.53 kg)..
$275.00
PST2051 - Rotator without controller (compare to T2X, G1000 good for tribander and 2 el 40 m Yagi)
Pro.Sis.Tel PST 2051D rotator without controller. Wind area: 2.5 m2 (26.9 sqft). Vertical load: ..
$749.00
PST61D - Rotator with controller (Compare to Orion 2800, HDR 300, G2800, good for Large Multi-band Yagis - OptiBeams)
Pro.Sis.Tel PST 61D rotator with controller. Wind area: 3.9 m2 (42 sqft). Vertical load: 8..
$1,595.00
PST110D - Rotator with controller (Compare to Prop-pitch, uses own special controller extreme large arrays)
Pro.Sis.Tel PST 110 rotator with controller. Wind area: 10 m2 (107.6 sqft). Vertical load: 1200 kg..
$3,295.00
PST Rotators Potentiometer 10 turn, 10 kΩ
These potentiometers are new, but have been previously been installed in PST rotators. This s..
$20.00
PST Rotators Potentiometer 3 turn, 500 Ω
Potentiometer, 3 turn, 500 Ω for Pro.Sis.Tel rotators Note: You may need to drill a 1/4" clearanc..
$80.00
PST Rotators Potentiometer 3 turn, 500 Ω with installation
ROTATOR MUST BE AT ARRAY SOLUTIONS IF YOU PURCHASE THIS ITEMPotentiometer, 3 turn, 500 Ω and install..
$125.00
PST Rotator DC Connector 7 pins. Round.
DC 7 pin rotator round connector. Uses pins 1 to 5 for PST rotators. ASSEMBLY DIAGRAM..
$35.00
ProSisTel Parts
We have most all of the replaceable parts for ProSisTel rotators and controllers.Some are listed..
$1.00
PST Serial to USB for Controller
Have you upgraded your computer, but not your controller?This complete kit has everything to conve..
$55.00
Tags: Prosistel, Pro.Sis.Tel, PST, rotators, rotors, PST641, Prosistel 641, PST641D, pst641d